View UPG2022T5G_1145776.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
NEC's 4.8 TO 5.85 GHz UPG2022T5G HIGH POWER GaAs MMIC SPDT SWITCH
FEATURES
* * OPERATING FREQUENCY: f = 4.8 to 5.85 GHz LOW INSERTION LOSS: 0.8 dB TYP. @ f = 4.9 GHz 0.7 dB TYP. @ f = 5.2 GHz 0.8 dB TYP. @ f = 5.8 GHz * * * POWER HANDLING: Pin (0.1 dB) = +31 dBm TYP. @ f = 4.8 to 5.85 GHz CONTROL VOLTAGE: Vcont = +2.8 V/0 V HIGH ISOLATION: (Between INPUT and OUTPUT) = 23 dB TYP. @ f = 5.2 GHz (Between OUTPUT1 and OUTPUT2) = 22 dB TYP. @ f = 5.2 * * * * INPUT/OUTPUT RETURN LOSS: 10 dB MIN. @ f = 4.8 to 5.85 GHz SWITCHING SPEED: 20 ns @ tRISE/tFALL (10/90% RF) 6-PIN PLASTIC SON PACKAGE: (2.0 x 3.0 x 0.75 mm) LEAD FREE
NEC's UPG2022T5G is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion loss. It is housed in a 6-pin plastic SON package.
DESCRIPTION
APPLICATIONS
* 5 GHz BAND WLAN * 5 GHz CORDLESS PHONES * 5 GHz ELECTRONIC TOLL COLLECTION * 5 GHz FIXED WIRELESS ACCESS
ORDERING INFORMATION
PART NUMBER UPG2022T5G-E1-A PACKAGE 6-pin plastic SON MARKING G4H SUPPLYING FORM * Embossed tape 8 mm wide * Pin 1 face the perforation side of the tape * Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2022T5G
California Eastern Laboratories
UPG2022T5G PIN CONNECTIONS
(Top View)
1 6 6 5 4
(Bottom View)
1 2 3
PIN NO. 1 2 3 4 5 6
PIN NAME OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
G4H
PARAMETER PARAMETER
2 3
5 4
ABSOLUTE MAXIMUM RATINGS (TA =+25C, unless otherwise specified)
SYMBOL Vcont Pin TA Tstg RATINGS -6.0 to +6.0 +36 -45 to +85 -55 to +150
Note
UNIT V dBm C C
Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature
Notes | Vcont1 - Vcont2 | 6.0 V
RECOMMENDED OPERATING RANGE (TA =+25C, unless otherwise specified)
SYMBOL Vcont (H) Vcont (L) f TA MIN. 2.7 -0.2 4.8 -40 +25 TYP. 2.8 0 MAX. 3.3 0.2 5.85 +85 UNIT V V GHz C Switch Control Voltage (H) Switch Control Voltage (L) Operating Frequency Operating Ambient Temperature
UPG2022T5G
ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, ZO = 50 , DC blocking capacitors = 27 pF,
Each port, unless otherwise specified)
PARAMETER Insertion Loss SYMBOL LINS TEST CONDITIONS f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz Isolation 1 (between OUTPUT1 and OUTPUT2) Input Return Loss ISL1 f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz RLin f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz Output Return Loss RLout f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz 0.1 dB Gain Compression Input Power Switching Control Speed Switching Control Current Pin (0.1 dB) f = 4.9 to 5.8 GHz MIN. - - - 13 15 15 10 10 10 10 10 10 30 TYP. 0.8 0.7 0.8 18 22 20 22 29 19 21 29 20 31 MAX. 1.1 1.1 1.1 - - - - - - - - - - UNIT dB dB dB dB dB dB dB dB dB dB dB dB dBm
tSW Icont
tRISE/tFALL (10/90% RF)
- -
20 0.5
- 1
ns A
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25C, Vcont = 2.8 V/0 V, ZO = 50 , DC blocking capacitors = 27 pF, Each port, unless otherwise specified)
PARAMETER Isolation 2 (between INPUT and OUTPUT) SYMBOL ISL2 TEST CONDITIONS f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz MIN. - - - TYP. 18 23 21 MAX. - - - UNIT dB dB dB
UPG2022T5G EVALUATION CIRCUIT
Vcont1 INPUT Vcont2
27 pF 1 000 pF 6 5 4 1 000 pF
1
2
3
27 pF
27 pF
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
TRUTH TABLE OF SWITCHING BY CONDITION OF CONTROL VOLTAGE
VCONT1 VCONT (H) VCONT2 VCONT (H) INPUT Note OUTPUT1 OUTPUT2 INPUT OUTPUT1 OUTPUT2 VCONT (L)
VCONT (L) INPUT OUTPUT1 OUTPUT2 INPUT
Note OUTPUT1 OUTPUT2
Note In case of VCONT1 = VCONT2 = High or VCONT1 = VCONT2 = Low, (that is same control voltage for both pins), input signal of INPUT (Pin 5) is output from OUTPUT1 (Pin 1) and OUTPUT2 (Pin 3).
UPG2022T5G PACKAGE DIMENSIONS 6-PIN PLASTIC SON (UNIT:mm)
2.0 0.750.1
3.0
(Bottom View) 0.70.1 0.19
0.95
0.95
0.25+0.07 -0.05 0.290.1 0.290.1
0.35+0.07 -0.05
0.70.1
UPG2022T5G RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
05/18/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPG2022T5G

	To Download UPG2022T5G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .